**OUT OF STOCK** Junckers Rustic Oil is an impregnating oil for in-door treatment for both priming and finishing of untreated wooden floors and table tops. Junckers Rustic Oil can also be used for maintaining other oil treated surfaces. Especially suited for treatment and maintenance of Junckers oiled solid hardwood floors
Features
| Product: Hardening Urethane oil in paraffinic solvent |
| Package size: 0.75 litre |
| Apperance: Provides wood with a deep warm glow |
| Gloss: The gloss level depends on the coverage of the final thin coats. Higher coverage gives a lower gloss level. Coverage: Oil-treated or impregnated wood: 20-50m2 per litre |
| Untreated wood: 5-10m2 per litre. |
Details
| Application Tool: Small areas (up to 4m2): Cloth or brush |
| Large areas (more than 4m2): Roller or lambswool applicator or spray in combination with a nylon scouring pad |
| Substrate Temperature: Minimum 5 degrees Celsius |
| Dilution: Delivered ready for use. Dilution is not recommended |
| Drying Time: Dry to touch after approx. 8 hours at room temperature. Ready to use after 24 hours. Full resistance is obtained after 3 days |
| Cleaning of tools: Junckers Thinner 007 or Junckers Thinner 008 |
| Storage: Lasts for 2 years if unopened and stored at 20 degrees Celsius. Once opened the oil will start to form a skin and may harden in the can |
| High Traffic Areas and Table Tops: 1 impregnating coat Junckers Rustic Oil 5m2/ltr + 2 thin coats Junckers Rustic Oil 50m2/ltr. High traffic areas should regulary be maintained. Apply a thin coat of Junckers Rustic Oil to avoid the surface from turning dull or use Junckers Rustic Top Oil |
| Low Traffic Areas: 1 Impregnating coat of Junckers Rustic Oil 5m2/ltr + 2 thin coats Junckers Rustic Oil 50m2/ltr. Maintain the surface by using Junckers Rustic Top Oil. Use Junckers Rustic Oil when a tendency of dullness appears |
Installation
Directions for Use: Priming of untreated/sanded floors and table tops: Ensure that the surface is absolutely clean, dry and free from dust, wax, grease, polish etc. Sand until surface is completely even using sandpaper, grit 120 or a similar soap free, clean abrasive nylon pad. Vacuum sanding dust. Determine the level of wood absorption and impregnation by applying Junckers Rustic Oil to a small area first. Soft wood and beech absorb more than hard and exotic (oily) wood species. The oil should saturate the wood and not be allowed to dry on the surface. Apply Junckers Rustic Oil and allow it to soak in for up to 30 minutes. If areas dry out faster, then apply more. Do not allow the surface to dry. After maxium 30 mins wipe off the excess oil. Dried and unabsorbed oil leaves glossy spots on the surface. The surface should appear matt and even. Plan your work well. Large area should be divided into smaller area 10-25m2. Leave the oil to dry 12-16hours before finishing treatment. Finishing of Primed Wood: Sand or scour the surface carefully with fine sandpaper grit 180-220 or a black nylon pad. Vacuum sanding dust. Apply Junckers Rustic Oil according to the level of absorption as described under "Priming of Untreted/sanded Floors and Table Tops" Remove surplus oil within 30 minutes with a dry soft cloth and buff the surface to an even finish using a clean under the buffing pad. A buffing machine can be used as well. Repeat the treatment after 6-8 hours. The surface is ready for light traffic 24 hours after application of the last coat. Wait until the oil has obtained the full resistance before replacing rugs or carpets.
Delivery
** PLEASE CALL OUR SHOWROOM FOR MORE INFORMATION 0141 440-1586 **
Other Options
| 5 Litres @ £35.64 each £25.02 more |
